CarPro Spotless 2.0 Water Spot Remover eliminates stubborn water spots and mineral stains without damaging your vehicle’s surface. Ideal for use with CarPro CQuartz, GLISS, and other high-end CarPro coatings, it safely restores a clean, smooth finish.

CarPro Spotless 2.0 Water Spot Remover For –

1.Body Paint:

• Begin by washing the vehicle with CarPro Reset, then rinse and dry the paint.

• Work in a shaded area on cool panels for best results.

• Next, prepare two damp Terry Weave Towels.

• Spray CarPro Spotless 2.0 directly onto the panel or onto one towel, then spread over the affected area.

• Allow it to dwell for 30 seconds to 1 minute.

• Afterward, wipe using the second damp towel to remove loosened mineral deposits.

• If needed, repeat the process.

• Finally, rinse the panel thoroughly and dry before proceeding.

2.Emblems and Wheels:

• Clean the surface using Reset, then rinse and dry.

• Test Spotless 2.0 in a hidden spot first.

• Apply the product to an applicator, brush, or microfiber cloth.

• Work one section at a time, letting the product dwell for up to a minute.

• Gently agitate, then rinse thoroughly with water and dry.

3.Textured Plastics:

• Wash the area with Reset and dry it well.

• Spray Spotless 2.0 directly onto the plastic or a microfiber towel.

• Spread generously to allow penetration into textured surfaces.

• Let it dwell for 30–60 seconds before using a detailing brush.

• Rinse thoroughly and dry the area.

4.Glass Surfaces:

• Spray Spotless 2.0 onto a Terry Weave Towel (never directly on glass).

• Apply it across the surface and let it sit briefly.

• Use the towel to polish gently.

• For persistent spots, apply the product to a polishing pad and use by hand or machine.

• Finish by rinsing the glass and surrounding panels with water.

Safety & Precautions:

• Avoid using under direct sunlight or on hot panels.

• Do not let the product dry on any surface.

• Use gloves and eye protection during application.

• Keep away from children and avoid inhalation or ingestion.

• This product may affect traditional waxes and window coatings.

Pro Tips:

• Use indirect lighting to detect water spots easily.

• Always work in small sections and cool conditions.

• Prevent overspray from reaching nearby panels or glass.

• Let Spotless dwell—but not dry—for effective results.